Contents
  1. Getting started
  2. Installing
  3. First setup and pairing the apps
  4. Lines and card readers
  5. Messages and calls
  6. Routing
  7. eSIM
  8. Compatibility list
  9. Network exits and proxy engines
  10. Hotspot and Wi-Fi
  11. Telegram bot remote control
  12. Status light (LED)
  13. Updates and backups
  14. Troubleshooting
  15. Users in the UK
  16. Comparison with other tools

Docs / 12

Status light (LED)

On a box with a status light (such as the W132D or the 410 stick), the light tells you how the gateway is doing. If your machine has no status light, skip this page.

What the light means

When several things are true at once, the lowest number wins.

#MeaningTwo-colour (W132D)Three LEDs (410)
1Network problemYellow, fast blinkBlue, fast blink
2Cevix itself is not runningYellow, slow blinkBlue, slow blink
3No line switched onOffOff
4A line has a problemRed, fast blinkRed, fast blink
5A line is connectingGreen, fast blinkGreen, fast blink
6New (unread) messagesGreen, slow blinkGreen, slow blink
7All fineGreen, steadyGreen, steady
–Starting up, or the light service has stoppedRed, steadyRed, steady
–Light switched off in Settings, or within night hoursOffOff

A fast blink is 0.2 s on, 0.2 s off; a slow blink is 1 s on, 1 s off. On the W132D, yellow is red and green together; on the 410, blue stands in for yellow and red and green stay off.

A few details

Turning the light off, or night hours

Under SettingsSystemStatus light (LED):

Changes apply within seconds and stay after a restart. If you do not see the Status light (LED) page, this machine has no light Cevix can control.

Do not stop services to turn the light off

Use the setting above. Do not stop Cevix’s services in the system: that takes every line offline.

If the web page warns that the light service is not running, run this on the gateway:

sudo systemctl enable --now cevixd-radio cevixd-led

Written for Cevix 2.0.4.