Contents
- Getting started
- Installing
- First setup and pairing the apps
- Lines and card readers
- Messages and calls
- Routing
- eSIM
- Compatibility list
- Network exits and proxy engines
- Hotspot and Wi-Fi
- Telegram bot remote control
- Status light (LED)
- Updates and backups
- Troubleshooting
- Users in the UK
- Comparison with other tools
Docs / 04
Lines and card readers
Each number is a “line” in Cevix. Insert a SIM card and the gateway recognises the carrier and the number, then creates and starts the line.
Adding a line
Under Overview or Lines, choose “Add a line”:
- Insert a SIM card
- Put the card in a reader or 4G module and the gateway creates the line itself.
- Add an internet line
- A Cevix on-net number or another internet calling account. These used to be called OTT lines.
- Add an eSIM number
- Scan a QR code or paste an activation code to download an eSIM onto an eUICC card; see eSIM.
- Borrow a remote card reader
- Use a SIM card in another computer’s reader; see below.
How many lines run at once depends on your plan.
Cevix on-net numbers (+850)
Gateways with a Cevix Link licence can text and call each other free on on-net numbers. On-net numbers are shown starting with +850 2, for example +850 2 2345 6789; the older +888 numbers keep working, and either form can be dialled. An on-net number can only reach other on-net numbers, never enters a carrier’s network, and cannot call emergency numbers.
The Lines page
Lines has three tabs at the top: Lines, Balance & keeping and Remote card readers.
On the left of Lines is every line, grouped by where its SIM sits: each card reader and 4G module, internet lines, and lines whose SIM is not in this gateway. Use “Search lines”, or show “All”, “Can call” or “Needs a look”. A slot without a card says “No line in this slot”; insert a card and its line appears by itself.
Choose a line and its details open on the right (on a phone, on the next screen). At the top, “Right now” shows three tags for whether the line can make Calls, send and receive Texts and use the Internet right now: green works, yellow works partly or is on its way, red does not work now. The tabs below:
- Overview
- State, signal, calling mode, and the latest texts and calls.
- SIM card
- The card’s details, PIN and phone number.
- eSIM
- Only for an eUICC card; see eSIM.
- VoWiFi or 4G VoLTE
- The line’s calling connection, including its country exit.
- Card reader or Module
- The hardware. A 4G module’s mobile data, network choice and bands are here too.
- SIM menu
- Only for a card in a reader: opens the card’s own menu (Alpha).
- Settings
- The line’s name, Line on/off, calling mode and more.
If you prefer the earlier layout (the rack of readers and modules with its tabs), choose “Use the old layout” below the list, or set “Lines page layout” to “Old” under SettingsAppearance & languageAppearance. To come back, choose “New (default)”.
Line numbers
Each line has a number: 01, 02, 03 and so on. The web interface, the apps and Telegram all use the same numbers.
- Only lines that are switched on get a number. A line switched off shows
--, and the lines after it move up. - Take the card out and the line keeps its number, with “Card removed” or “Card not inserted” beside it.
- Change the order in “Line order” under SettingsAppearance & languageAppearance.
Swapping cards
When you put a different card in the same reader:
- The old card’s line switches off by itself, with a note that the card was swapped.
- The new card gets a new line.
- Put the old card back in any reader and its line comes back by itself. To stop that, choose “Keep off”.
- A line you switched off yourself stays off when its card comes back.
Check line
“Check line” under Overview shows, step by step, what works and what does not. Click a line’s card to check that line. The summary at the top says All good, Partly working, Needs attention, Not connected or Switched off.
A SIM line has five steps: SIM card, connection to the carrier, carrier registration, texts and calls. Start fixing at the step where it stops; each step with a problem says what to do. Below are “Send a text”, “Dial”, “Manage line” and “Export support bundle”.
When a 4G VoLTE line roams onto a network that gives this SIM no VoLTE, the line says it is on texts only because there is no VoLTE here, and texts keep working. Beside it, “Try another network” lists the other networks the module can see, marking where this SIM had VoLTE before. It tells you first that the line drops briefly; the gateway never changes network by itself.
The 48-hour bar
Each line’s card has a bar for the last 48 hours:
- Green
- Online.
- Red
- Down for more than 60 seconds.
- Thin amber mark
- A brief reconnect, back within 60 seconds.
- Grey
- Switched off, or no data.
The card says “48 h all green”, how many times the line dropped, or how many brief reconnects it had. Restarting the gateway does not count as a drop.
Line on/off and calling mode
“Line on/off” starts or stops a line, and “Restart line” beside it connects it again (during a call it asks first). “Calling” only decides how calls go:
- Automatic
- VoLTE when the network offers it; VoWiFi when roaming or when VoLTE fails; texts only when neither works, trying calls again later by itself.
- VoLTE (cellular)
- Calls and texts over the mobile network of the gateway’s built-in 4G module (such as the 410 stick).
- VoWiFi (Wi-Fi / internet)
- Calls and texts over the internet to the carrier’s Wi-Fi Calling.
- Texts only (cellular)
- Texts over the 4G module only, no calls. This is not off: the line keeps running.
- This card is data only
- For a card with mobile data but no calls or texts (a travel data SIM, for example). The line does not sign in for calls; the 4G module’s mobile data is left alone.
A card in a USB reader can only use VoWiFi. Automatic, texts only and data only need a 4G module; VoLTE needs the gateway’s built-in 4G module.
Data-only cards
For a line whose calling mode nobody has chosen, the gateway works out whether the card is a data SIM: a known travel data SIM, or a card with no SMS centre number, shows “Data only (no calls or texts)” with the reason, and “Right now” shows Internet alone. When the carrier refuses the card on every calling path again and again, the gateway treats it the same way and tries calls again from time to time.
If the card can call after all, choose “This card can call”, or choose a calling mode yourself, and the line signs in for calls again.
Balance and number keeping
Some carriers take a number back if it is not used. Under LinesBalance & keeping you see each line’s balance and expiry, and can turn on “Enable number keeping”. “Keeping method” has three choices:
- Send a chargeable SMS (prepaid SIM): sends a text to the “Recipient number” at set times. Your carrier charges for it.
- Make a timed chargeable call (prepaid SIM): places a call at set times and hangs up a set number of seconds after it connects.
- Watch the balance, warn when low (plan SIM): only checks the balance, and warns you when it will not cover the next period.
Profiles not in use on the same eSIM card are listed too. To keep one, the gateway switches the card to that profile, keeps it, then switches back; during a call it waits for the call to end.
The Free plan cannot send texts, so it cannot keep a number by text.
Borrowing another computer’s card reader
A SIM card in another computer works too:
- On the Cevix that lends the reader, open SettingsSharingShare card readers, turn on “Share this computer’s card readers” and copy the share code.
- On the gateway that uses it, open LinesRemote card readers, paste the share code and choose “Add”.
The borrowed reader is listed with your other readers and works as if it were plugged in here.
A shared reader is used only by the other Cevix. If a line on this gateway uses that reader, saving first names the lines that will stop and asks “Share these card readers anyway?”. Once shared, that line says the reader is shared with another Cevix, with “Stop sharing” beside it.
Sharing a line
Instead of lending a whole reader, you can share the use of one line (calls and texts). It never moves or shows an eSIM profile, an activation code or a SIM key, and you can take it back at any time. Only SIM lines can be shared. Under SettingsSharingShare a line:
- Share with another Cevix
- Pick the line, tick “What it may do” (make and answer calls, receive texts, send texts, see call history and voicemail) and choose “Create share code”. The code starts with
CXL1., is shown once, and should be kept like a password. The other Cevix sees only this line, and nothing else of this gateway. - Share with a member
- Assigns the line to a member of this gateway, the same as assigning it under Users. You still see its records, but cannot call or text on it until you take it back under Users.
- Add a line shared with this gateway
- On the receiving Cevix, paste the
CXL1.code and choose “Add line”. The line shows on the overview with the gateway it lives on.
“Shared lines” lists the lines shared with other Cevix gateways. You can “Change permissions”, or choose “Revoke” to take a line back; it stops working there at once. Share codes and gateway link codes together are limited to 20.